Wi-Tek WI-PS526G. Wi-Tek commercial range unmanageable PoE switch. 24 PoE 10/100 Mbps ports. 2 Gigabit combo ports. Total PoE delivery of 250W. Supports 802.3af/at/bt PoE. CCTV mode up to 250m. Watchdog PoE. Plug & Play without configuration 24fe+ 2combo sfp 250m long range poe switch with 24port poe.

Wi-Tek provides a robust and cost-effective PoE solution to power your cameras, access point and other IP-based devices up to 250m away.

With Hi-PoE outputs up to 60W, features such as CCTV Extend mode, Watchdog PoE function, port isolation, provide added value to basic networking needs, creating a versatile and reliable surveillance network.

Hi-PoE 60W design for higher power PoE devices

The High-PoE switch is the enhanced version of the PoE switch with higher PoE power. Ideal for applications requiring high power PoE, such as IP PTZ cameras and other high power consumption devices.

CCTV Extend mode. Long distance PoE up to 250m

DIP switch provides Extend mode. All PoE ports can transmit data and power up to 250 meters. No other hardware or configuration is required, easy to use and cost saving.

Perfect for deploying surveillance cameras over large areas.

 Watchdog PoE. Automatically reboots your cameras if they are not working.

When the switch detects that it has lost signal from one of the PoE devices, it automatically reboots the port to try to re-establish signal with the device.

 Port isolation to avoid Broadcast Storm

With VLAN mode, all PoE ports can only communicate with Uplink ports.

It avoids data leakage between each port and prevents Broadcast Storm.

• Wi-Tek Commercial PoE Unmanaged PoE switch
• 24 PoE RJ45 10/100Mbps ports
• 2 100/1000Mbps combo ports
• 250W total PoE delivery
• 60W Hi-PoE support on ports 1 and 2
• PoE 802.3 af/at/bt PoE standard
• Forwarding Type: Store-and-Forward
• MAC Addresses: 8K
• Packet forwarding rate: 3.87 Mbps
• CCTV mode up to 250 meters
• VLAN port
• Watchdog PoE
• MAC address auto-learning
• Automatic store and forward
• IEEE 802.3x flow control for full-duplex mode
• Backpressure for half-duplex mode
• Power supply: 110V ~ 240V AC, 50/60 Hz
• Power consumption: Max. 250W (with PoE devices connected)
• Storage temperature from -40°C ~ +70°C
• 10°C ~ +55°C operating temperature
• Storage humidity from 5% ~ 90% (non-condensing)
• Operating humidity from 10% ~ 90% (non-condensing)
• Metal enclosure with two fans
• Dimensions: 440 x 290 x 45 mm
• Weight: 3.25 kg
• For more information, please refer to the data sheet.

- WITEK-0008