DEM-720. Video, data and contacts transmitter. 1310 / 1550nm wavelength. SC connector. Singlemode SM fiber (9/125). Up to 25 km. 12V ~ 24V DC / AC. Extended temperature range. DIN rail / tabletop / rack (PAWAL) Tx vídeo+datos+contacto 1310/1550nm 1 x sm-40°/74°c 12-24vac/vdc 50km pawal.

The DEM-720 equipment allows to create point-to-point links for the digital transmission of video + data and contact over an optical fiber, up to distances of 25 km (50 km with receiver). Provided with a communication channel compatible with the EIA / TIA / RS-232,422 & 485 standard. Built-in alarm mode, activating the isolated contact on the receiver when the video signal or link is lost. Front LEDs for verification of power supply, links, remote / local contact and data transmission. Plug and Play design that facilitates the start-up of the installation. Digital video transmission allows longer link distances with high image quality. Rack mounting formats for 19 ”3U Chassis (PAWAL) and desktop / DIN Rail.

    Input / output impedance: 75Ω

    Input / output voltage: 1.2V ppmax

    Video connector: BNC

    Pass band: 10Hz - 6MHz

    Signal to noise ratio:> 60dB

    Sync error: <5%

    Differential gain: <2.5%

    Differential phase: <2 °

    C / L gain: <5%

    Selectable data: RS232 / 422/485

    Speed: Up to 250Kbps

    Data connector: RJ45

    RS422 / RS485 termination resistance: 120Ω

    Input: Dry contact

    Maximum output voltage: 250V AC / 350V DC

    Maximum output current: 25 mA

    Single mode optical power: -15dBm

    Single mode reception sensitivity: -34dBm

    Power supply: PAWAL 12V ~ 24V AC / DC (± 15%)

    Consumption: 125 mA / 12V DC

    Operating temperature: -40 ° C ~ + 74 ° C

    Storage temperature: -55 ° C ~ + 85C

    Relative humidity: 95% (non-condensing)

    MTBF: 100,000 hours

    Dimensions: 41 x 106 x 84 mm