Dahua XVR5104H-4KL-I2. XVR 5 in 1 Dahua WizSense with 4 channels HDCVI / HDTVI / AHD / CVBS + 8 channels IP 8MP (added to the BNC inputs). BNC inputs can be converted to IP. AI / H.265 + / H.265 / H.264 + / H.264 format. Two-way audio. Plays 4 channels. 64 Mbps. Recording 8MP (7 ips), 6MP (10 ips), 5MP (12 ips), 4K-N, 4MP, 3MP (15 ips), 4M-N, 1080N, 720P, 960H, D1, CIF (25 ips ). HDMI output (4K) and VGA output (1080P). 2-channel perimeter protection. 2-channel facial recognition. 4 channel SMD Plus. Supports 1 SATA HDD up to 10TB. RJ45 Fast Ethernet. Onvif, CGI, P2P, DDNS. 2 USB, 1 RS485. 12V DC. Desktop

specs

5 technologies: IP cameras, HDCVI, HDTVI, AHD and analog CVBS with automatic signal recognition

4 BNC channels up to 8MP / 4K (BNC inputs can be converted to IP)

4 8MP IP channels (added to BNC inputs)

Video compression: AI, H.265 +, H.265, H.264 +, H.264

Video outputs HDMI (4K), VGA output (1080P)

Output division: 1, 4 (IP mode off); 1, 4, 8, 9 (IP mode enabled)

1 RCA input / 1 RCA audio output

Two-way audio via RCA input / output

Audio compression: G.711a, G.711u, PCM

Recording resolution: 8MP / 4K, 6MP, 5MP, 4K-N, 4MP, 3MP, 4M-N, 1080P, 720P, 960H, D1, CIF

64 Mbps maximum incoming bandwidth

Main stream: 8MP / 4K (1 ~ 7 ips), 6MP (1 ~ 10 ips), 5MP (1 ~ 12 ips), 4K-N / 4MP / 3MP (1 ~ 15 ips), 4M-N / 1080N / 720P / 960H / D1 / CIF (1 ~ 25 ips)

Secondary Stream: 960H (1 ~ 15 ips), D1 / CIF (1 ~ 25 ips)

Recording modes manual, by calendar, by video detection, video loss, tampering, alarm, stop

Intervals for recording (1 ~ 60 minutes), pre-recording (1 ~ 30 sec.) And post-recording (10 ~ 300 sec.)

Independent configurable video sensor per camera (selectable 22x18 grid), video loss detection and masking, diagnostics

Playback of up to 4 channels

Perimeter protection: 2 channels, 10 IVS for each channel

Face recognition: 2 channels, only supports analog cameras

SMD Plus: 4 channels, people / vehicle classification

Internal capacity for 1 SATA HDD up to 10TB (sold separately)

Multilanguage on-screen menu with new improved graphical interface

Possibility of updating the firmware of DAHUA cameras from the recorder itself

Software and hardware watchdog

Watermark to preserve the integrity of the videos

RJ45 Fast Ethernet network port (100MB)

Network protocols: HTTP, HTTPS, TCP / IP, IPv4 / IPv6, Wi-Fi, 3G / 4G, SNMP, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Server Alarm, P2P, IP Search (supports Dahua IP cameras, DVR, NVS, etc.)

ONVIF 16.12 and CGI compliant

Remote access from web browser and iPhone, iPad, Android devices (EVO and Peepall App)

Sending emails with attached photograph in alarm

Send to FTP scheduled or in alarm

Possibility of sending alarm and being connected to alarm receiver software (C.R.A.) using free AlarmSpace software

Possibility of fixed or dynamic IP through DDNS Evolution service

Communication ports: 2 USB 2.0 ports, 1 RS485 port (for PTZ control)

Power supply: 12V DC, 2A (<7W, not counting discs)

Storage temperature -20 ° C ~ + 70 ° C

-10 ° C ~ + 55 ° C operating temperature

Relative humidity 0% ~ 90%

Dimensions: 325 (W) 55 (H) x 257 mm

Weight: 1.2 kg